Induction Heating
Induction Hardening
INDUCTION HARDENING
HEAT TREATMENT
HEAT TREATMENT
HEAT TREATMENT
HEAT TREATMENT
HEAT TREATMENT
RF Heater

INDUCTION HARDENING
Induction Hardening of all types of components from any small diameter up to 2m diameter, any small length up to 5m length, any small weight up to 5 ton weight, with an attitude to enhance further. For any small quantity to high mass production quantity for various industries.

ROLLERS

Backup Roll, Guide Roll, Pinch Roll, Deflector Roll, Bridle Roll,Work Roll, Cradle Roll, Thrust Roll, Leveler Roll, Slitter Roll, Track Roller,Track Roller Shaft, etc. for Plastic Industries, Textile Industries, Paper Industries process Industries, Rolling Mill, etc.


Diameter : 306-1260mm
Hardness : 58-62 Hrc,Case Depth : 0.5-3 mm
Diameter : 360-1160mm
Hardness : 58-62 Hrc,Case Depth : 1.5-6 mm
Diameter : 100-1400mm
Hardness : 58-62 Hrc,Case Depth : 5-10 mm
Diameter : 300-1200mm
Hardness : 58-62 Hrc,Case Depth : 8-40 mm

Roll Hardening Process
BRAKE DRUMS Hardened BRAKE DRUMS
Diameter : 100-600 mm -> Hardness : 35-45 HRC,
Case Depth : 3-5 mm
FLAT DIES
Forming Die, Liner, Guide Way, Machine Column, Lathe Bed,Machine Bed, Lead Screw, Ball Screw, Rail, V-Punch, Shear Blade,Liner, Crimping Die, Track Liner, Wedge, Expander tool etc.
Face width : 40-600 mm -> Hardness : 35-45 HRC, Case Depth : 3-5 mm.
Flat Dies Hardened
Roll Hardening

AUTOMOBILE COMPONENTS

     Camshaft, Crankshaft. Rear Axle Shaft, Front Wheel Spindle Shaft,Spline Shaft, Transmission Shaft, Shifter Fork, Rocker Arm,Rocker Pad. Various Transmission Gear, Hnd Piece, Differential Housing., Cylinder Head, Pump Shaft. King Pin, Universal Joint Push Rod, Starter Gear Ring, Gudgeon Pin, Valve Seat,Taper Lever, Screw Ball, Rotor Spindle etc Any desired hardness pattern could be achieved.

Cam Hardenings
Coil Hardened
SHAFTS
Axle Shaft, Cam Shaft. Spline Shaft, Piston Rod, Pin, Flute, Tube, Pipe etc.
Diameter : 20-200 mm -> Hardness : 50-56 HRC, Case Depth : 3-5 mm.
Shaft Hardened
Vel Induction Heater Induction Heating Process
WHEELS
Crane Wheel, Trolley Wheel etc.
Diameter : 160-900 mm -> Hardness: 40-45 HRC, Case Depth : 5-10 mm.
Wheels Hardening

TOOLS / FASTENERS
Lead screw, Chisel, Bolt Head, Hammer Head, File, Hacksaw Blade,Letter Punch, Rock Drill, Cutter, long, Pliers, Tip of Screw Driver,Link,Hook, Eye Bolt, Track Link, Track Pin,Track Shoe Bolt, Nut,Screw, Wrench, Spanner, Knife, Hopper, Type writer Key, etc.Any desired hardness pattern could be achieved.

Gears Hardened

GEARS
Spur Gear, Helical Gear, Bevel Gear, Rack, Pinion, Worm Gear, Worm Ring Gear,Shaft, Gear Casing, Gear Coupling, Infernal Gear External Gear etc.
Diameter : 10-100 mm, Thickness : 5-20mm,Module 1-10 - Hardness: 45-50 HRC, Case Depth: 1 -3 mm.
Diameter : 100-1500 mm, Thickness / Face Width : 20-600 mm,Module : 1O-100-Hardness : 45-50 HRG, Case Depth 3-10 mm,
(Root/Crest Hardening).

SPROCKETS
Sprocket for Chain Conveyor, Bucket Elevator, Transmission Line etc.
Diameter : 100-1500 mm, Thickness : 4-160 mm,

Roller Diameter : 6-100 mm -> Hardness : 50-56 HRC, Case Depth 1.5-10 mm,Root Hardening.

Sprockets Hardened
Bltada Hardening
GROOVE RINGS
Slue Ring, Revolving Joint, V- Pulley, Bearing Race, Rope Drum,
Flat Pulley, Bearing Collar, Flange etc.

Diameter : 25-100 mm    -> Hardness : 50-56 HRC,
Case Depth : 1.5-3 mm.
Diameter : 400-1800 mm -> Hardness ; 50-56 HRC,
Case Depth : 3-5 mm.
Pulley  Hardness

TOOLS / FASTENERS
Lead screw, Chisel, Bolt Head, Hammer Head, File, Hacksaw Blade,Letter Punch, Rock Drill, Cutter, long, Pliers, Tip of Screw Driver,Link,Hook, Eye Bolt, Track Link, Track Pin,Track Shoe Bolt, Nut,Screw, Wrench, Spanner, Knife, Hopper, Type writer Key, etc.Any desired hardness pattern could be achieved.

Screw Hardess
INDUCTION SHRINK FITTING

INDUCTION SHRINK FITTING
Shrink Fitting Roller Bearing, Inner Race, Bush, Sleeve, Pinions,Rotor Shaft Assemblies, Pressure Tube in PHWR etc.


INDUCTION CASTING
Any Special Casting of Alloy / Ferrous / Non Ferrous material in small capacity may be casted to specific requirement-

INDUCTION CASTING
INDUCTION BRAZING

INDUCTION BRAZING
Brazing of Copper to Copper, Copper to Stainless Steel, Stainless Steel to Mild Steel, Mild Steel to Carbide Tool, Any Metal to Any Metal.

............................................................................................................................................................................................
............................................................................................................................................................................................
© 2003-05 Vel Induction Hardening. All Rights Reserved Webpartner: Niftysoft Solution, India.